The Aluminium Vial Cap Sealing Machine has been constructed specifically to seal glass vials with aluminium caps. This is a compact model to promote easy use and easy operations. The machine has been used primarily in the pharmaceutical industry. This Cap Sealing Machine is used majorly by people for filling glass vials that are injectable in nature with flip-off cap sealing of aluminum material. In accordance with the output that is needed, the number of the sealing heads may or may not change. The High Speed Vial Cap Sealing Machine comes along with great speed and it is extremely easy to use and maintain on a regular basis.
Salient features of this Automatic Cap Sealing Machine have been elaborated through the following points:
- cGMP model of the machine
- No Seal in Chute - Machine Stop feature stops the machine when the chutes in the machine are empty
- No Stopper on vial before sealing - Machine Stop system allows you to stop the machine as soon as there is a problem with the stopper
- A single motor has been placed in the machine to integrate conveyor, star wheels and turret of the platform. This is essentially done to control the speed and ensure that synchronization of the system is being done. However, the speed can also be monitored and controlled.
- Parts that are in contact with the air are made of Stainless steel which has been approved by the GMP standard as well
- Rollers restrict any damage to the aluminum caps
- Pressure of the different gauges and sizes of caps may vary from time to time
- Speed adjustment is possible
- Digitalized counter for counting the number of vials
- Photo sensing device integrated
- Acrylic cabinet
- Clutch device to stop a machine when a vial is overturned
Technical Specifications of this Automatic Vial Cap Sealing Machine include:
Model |
ACS-60 |
ACS-120 |
ACS-250 |
Number of Heads
| Two
| Four
| Eight
|
Production Rate
| 30 to 60
Vials/Minute
| 60 to 120
Vials/Minute
| 100 to 200 Vials/Minute
|
Input Specification
- Container Diameter:
- Container Height:
- Rubber Stopper:
| 15mm to 80mm
25mm to 180mm
13mm, 20mm & 28mm, 30mm & 33mm with the help of change parts. |
Power Supply
| 0.5 H.P.
| 1 H.P.
| 1.5 H.P
|
Electrical Characteristics
| 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
Optional Accessories:
|
- Aluminium profile cabinet covering full machine
- Chuck for flip-off seal
- PLC with GUI
|
Overall Dimension:
| 1250mm(L) x
800mm(W) x
1800mm (H)
| 1400mm (L) x
850mm (W) x
1800mm (H)
| 2000mm (L) x
850mm (W) x 1800mm(H)
|
| (Dimension include basic machine & 30” In-feed turn table) |