The Vial Filling and Plugging Machine was made to help in the filling of injectable glass vials with liquid. The machine majorly consists of a conveyor belt, turntable, pre-gassing, filling and post-gassing aspects. This Plugging and Capping Machine is made of stainless steel material of 316L quality which passes the GMP standards and assures the best return on investment in the longer run as well. Synthetic rubber tubes have been made and compact panel allows easy reachability.
Since the distance between filling and stoppering is pretty less, the risk in getting any contaminations reduces considerably. The Automatic Filling Plugging Machine clearly needs a sterile environment to work in. It also offers a laminar flow protection. Redesigning of the un-scramble has been done to remove the dead ends and clean the machine properly.
Model | APF-120 |
---|---|
Product Rate | 30 to 120 Vials/ Minute |
Input Specification: Container Diameter | 25mm to 38mm |
Input Specification: Container Height | 36mm to 75mm |
Input Specification: Container Diameter | 20mm, 28mm and 30mm Butyl |
Fill Capacity | 50 mg. to 1.5 gms with the help of change parts. Up to 6 gms filling by multiple dosing. |
Accuracy | + 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh) |
Optional Accessories | Pure Air Filter, Vacuum Pump, Oil Free Air Compressor, Online Pre-Media Filling Arrangement, Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine |
Compressed Air | Max. 2 Kg./Cm2 Oil Free |
Vacuum | 25 Hg. @ 300 LPM Displacement |
Relational Humidity | Below 28% |
Overall Dimension | 2100mm (L) X 842mm (W) X 1700mm (H) (Dimension include main machine with in-feed turn table) |